Contact Cleaner – 9992 : senfineco

Properties

• Excellent penetration Properties
• Displaces moisture – Prevents short circuits
• Gives water-repellent surface
• Evaporates quickly and residue free
• Does not contain silicone, chlorine or acetone
• Neutral towards rubber, nylon and plastic parts

Application

• Cleaning and degreasing of contaminated and corrosive electrical contacts
• Eliminates interference with signs of loose contact
• Disconnect contacts from the power supply. Spray the products on to the contacts and leave approximately 5-10 minutes depending on the level of contamination. Contacts can be connected to the power supply 10 minutes after treatment is completed.
• Remove dirt by a dry cloth, brush or compressed air. If the product gets to the lacquer or plastic surfaces, wipe them with a wet cloth.

Available in

450 ML – aerosol REF. 9992
400 ML – aerosol REF. 9992X (with smart head)